The 200 Vario offers three mounting areas: at the front, centre and rear. It is therefore ideally suited for operations with economical implement combinations. Combinations not only save operating time and machine costs, but also increase working quality by reducing driving tracks and soil compaction. The implement mounting plate provides an additional mounting area between the axles. It is available as a factory-fitted option.

The swinging power lift can be adapted to difficult slopes hydraulically. The infinitely adjustable tilt and horizontal control directly from the driver seat, the V- and F-tractors provide enormous benefits when working with a ripper, plough or fork lift.

Modern implements demand ever greater flexibility and performance from the tractor hydraulics. Fast lifting and high oil delivery rates are required for economical and precise operation. The 200 Vario meets all the demands on the hydraulic system. With the high-tech hydraulic system from Fendt, implements that have many hydraulic functions, for example a leaf cutter, can be controlled easily and comfortably.

The 200 Vario is equipped with a load-sensing hydraulic system, i.e. modern axial piston pumps deliver precisely the amount of hydraulic oil that is required – up to 76 litres per minute (with flow collection 106 l/min). A maximum of 25 litres of hydraulic oil is available to mounted or trailed implements. The oil supplies for the transmission and hydraulics are separate. Unrestricted use of bio-oils for the hydraulics is therefore possible without problems.